Sensor and RFID tag are combined into one

Introduction: Turck's diverse sensor tags can record and store data for several hours


Turck's high-frequency RFID/sensor tags record and store measurements such as temperature and pressure and can be read contactlessly.

Turck, sensor, RFID, identification target



For customers in need, Turck can develop and produce custom RFID tags that integrate sensor functionality. Sensor tags record and store process values ​​such as temperature or pressure of moving components. Sensor elements can be replaced and can also be used to measure humidity, magnetic fields, reed contact or inductive signals. The sensor tag is powered and read by a high-frequency RFID read/write head. Using a separate energy source, data can be recorded even without touching the read/write head. Depending on the frequency and type of measurement, as well as the environmental variables, the measurement period can be continuously recorded for several hours.




Turck's sensor tags are suitable not only for non-contact monitoring and storage of measured values ​​or other data, but also for moving components. The component is connected to a slip ring device with a high maintenance rating. For example rotor identification, specific process parameters can be stored. In addition, they can perform non-contact collection of data inside or in sealed containers. Users can also use conventional RFID capabilities to identify targets in a conventional way.





Sensor tags have different requirements for use in every application, from their mechanical properties to physical measurements, to measurement range and resolution. Therefore, Turck developed a separate high-frequency sensor tag for a specific customer application.




More information

Product Folding - Sensor Tag RFID 2.0 (English)



Argentina Plug

There is no requirement for the shape of the two-core Argentina plug, only that the distance from the pin to the edge is not less than 8mm, and the maximum size of the three-core Argentina plug is 38mm. The power cord plug looks like an Australian plug and also looks like a national standard plug. However, the size of the plug of his plug is different from that of Australia. The length of the pin is 1 mm, so the size is also a bit different. The most important point is that the plug direction is different and the grounding direction is opposite.

Argentina Power Plug,Argentinian 3 Pins Plug,Iram Power Cord,Argentina Plug Type

Guangdong Kaihua Electric Appliance Co., Ltd. , https://www.kaihuacable.com