The internal structure of the new LED bulb is revealed (5): improving the heat dissipation of the LED package

Toshiba Lighting and Sharp's new LED bulb internal structure reveals (1)

Toshiba and Sharp's new LED bulbs are revealed (2): the radiator structure is different

The internal structure of the new LED bulb is revealed (3): the size of the power supply circuit is significantly different

The internal structure of the new LED bulb is revealed (4): changing the heat dissipation method to achieve low cost

The internal structure of the new LED bulb is revealed (5): improving the heat dissipation of the LED package

Improve the heat dissipation of LED packages

The three companies described above have improved the way the LEDs dissipate heat in order to increase the efficiency of LED substrate heat transfer to the heat sink. The common point is that the substrate employs a metal base plate in which an insulating layer is sandwiched between the aluminum alloy plate and the wiring pattern. There is not much difference in the measures taken to facilitate the heat conduction of the LED chip to the mounting portion of the substrate.

In the future, in order to realize an LED bulb having a brightness equivalent to a 100W incandescent bulb, a countermeasure against heat dissipation different from this is required. The new LED package is one of the countermeasures.

Nippon Tungsten has developed an LED package that combines a silver-plated copper lead frame with a ceramic housing (Figure 15). The package will serve as a chip backplane supplier with no LED chips installed.

Figure 15: The LED packaged copper plated lead frame provided by Nippon Tungsten is fixed on a lower-priced ceramic case. Heat is mainly conducted to the heat sink through the lead frame.

In the past, there have been products using high thermal conductivity aluminum nitride materials as LED package housings. The heat of the LED can be conducted to the package backplane by means of the housing. Although the case is capable of realizing a high-power LED package by virtue of its thermal conductivity and heat resistance superior to that of a resin case, it is expensive.

In contrast, the Japanese tungsten chip package substrate uses a copper lead frame as a heat conduction path instead of an LED package. The outer casing is made of an inexpensive ceramic that has poor thermal conductivity but excellent heat resistance. This reduces the cost to half that of the original ceramic LED package.

Although the structure of this package is very simple, copper has a low melting point and is difficult to combine with ceramics. To this end, the company has developed a ceramic that can be fired at a temperature lower than the melting point of copper and has strong copper bonding. By improving the temperature control and fixing method during firing, a high-precision chip substrate with electrodes (between the tips of the lead frames) spaced less than 70 Î¼m was successfully developed (Fig. 16). Sample supply is now available.

Figure 16: Results of LED packaged prototypes and thermal conductivity analysis of Nippon Tungsten The company developed a ceramic that can be fired at a temperature lower than the melting point of copper and has a high bonding ability with copper. The prototype can be installed with 10 LED chips, and the thermal conductivity is good. The temperature difference between the LED chip and the lead frame is about 2 Â°C. In thermal analysis, the closer to red, the higher the temperature.

The "Electrical AGSP Backplane" of the electrical and chemical industry is also one of the means to improve the heat dissipation of LED packages. The company used the technology developed by Daiwa Industry (Headquarters: Okaya, Nagano Prefecture) to create a base plate with arbitrary shapes of copper pillars running through any position. If the backplane is used as part of an LED package, the contact of the copper post with the LED chip can be used to conduct heat to the heat sink. Although there are still problems to be solved in terms of cost, the adoption of new packages is expected to expand in the future. (End of the article)

Toshiba Lighting and Sharp's new LED bulb internal structure reveals (1)

8 Inch Tablet

^{Today let}^`^{s talk about}^{8 inch tablet}^{with android os or windows os. There are many}^{8 inch tablets on sale}^{you can see at this store.}^{8 inch Android Tablet}^{is absolutely the No. 1 choice if you are searching a student online learning project.}^{8 inch windows tablet}^{is more welcome when clients are looking tablet for business application. The most welcome parameters level is 2 32Gb with 4GB lite, 4000mAh, android 11 only around 60usd, price will be much competitive if can take more than 1000pcs.}^{7 Inch Tablet wifi only}^,^{android tablet 10 inch}^,^{Amazon 8 inch tablet}^{is also alternative here. Except tablet, Education Laptop, Gaming Laptop, 1650 graphics card laptop, Mini PC and All In One PC are the other important series.}

^{Therefore, you just need to share the configuration, application scenarios, quantity, delivery time, and other special requirements, then will try our best to support you.}

^{Any other thing in China we can do, you can also feel free to contact us.}

^{You will find that cooperating with us is the best choice, not only save time and energy, but also save much cost.}

8 Inch Tablet,8 Inch Android Tablet,Amazon 8 Inch Tablet,8 Inch Tablets On Sale,8 Inch Windows Tablet

Henan Shuyi Electronics Co., Ltd. , https://www.shuyielectronictech.com