1. Pain points of electrical equipment users
With the increasing labor cost, electrical equipment is becoming more and more complex, in order to improve production efficiency and reduce the need for labor. Now there are fewer and fewer large factories with 10,000 people in the Pearl River Delta, and the degree of automation of the equipment is correspondingly higher and higher. The degree of automation is higher, and the corresponding equipment is more and more difficult to use. Many users rank these high-end atmospheres. The equipment is troubled. On the one hand, only more advanced equipment can save people. On the
Other hand, the experience and ability of employees cannot keep up, resulting in low equipment efficiency, poor quality and many problems. Therefore, the users of the equipment are nothing more than the following requirements: 1. Improve efficiency; 2. Improve quality; 3. Reduce failure rate.
2. Device bank empowers device users
Device Bank is the world's leading device cloud operating system, which implements device access, cloud access, analysis, and electronic signage in a minimalist way. Here, let’s not bother to introduce device banking, everyone
You can scan the QR code below the QR code, or search the device bank in the WeChat applet, and use it for free.
The scenario after connecting the device to the cloud through the device bank is as follows: Boss Sun in the northeast has a factory. Recently, a blow molding machine made in Guangdong was newly added. After he bought it, he gave it to the young operator Xiao Chen. After the equipment was in place, the supplier of the blow molding machine sent his after-sales service engineer Huang Gong on-site service to help debug the equipment, and then also taught Xiao Chen how to set it up and use it. Then Huang Gong went back to Guangdong. As a result, the phone from the Northeast was chased before he entered the house. All kinds of problems, in short, it couldn't be used normally, and it was not clear. He must go to the Northeast for service. once. When Huang Gong arrived in the Northeast, he found that it was a problem with some parameter settings. After adjustment, everything was normal. The problem was that the equipment factory had to pay for the travel expenses of several thousand yuan. After half a month, Boss Sun produced it. For a bottle of another specification, Xiao Chen couldn't adjust the parameters again, so he had to call Huang Gong to visit again. Although Boss Sun paid the cost of the visit this time, he was unwilling to do so and Huang Gong also had a headache.
In the second year, Boss Sun had a big business and wanted to expand another production line and buy another injection molding machine. This time Boss Sun learned his skills and asked Huanggong's equipment factory to include one year of free training and guidance services in the contract. . For this reason, Huang Gong installed an equipment banking system on the newly provided injection molding machine. This time, Xiao Chen is still responsible for receiving the new equipment. After Huang Gong handed over the equipment, he went back to Guangdong. Xiao Chen called again the next day and said that the shell deformed by the new equipment was very serious. He was not sure if there was a problem with the equipment. He strongly requested Huang Gong to come to service because it was It is stated in the contract. Huang Gong took out his mobile phone in a hurry and opened the WeChat applet: Device Bank, he looked at Boss Chen’s injection molding machine parameters, and immediately understood what was wrong with Xiao Chen, and then remotely guided Xiao Chen to modify the parameters (remote control is supported, but For this type of heavy machinery is not safe, so try not to control it directly), the problem is solved soon, Xiao Chen is very happy, this is equivalent to having a master by his side for 24 hours, and never because the equipment will not be used again. And worried. Boss Sun is also very happy. In the past, he always worries about why he has three identical production lines with different quality and output. Now with the equipment bank, he can easily see the usage and analysis of each equipment Report, summarize the problems, improve the process, and increase production efficiency. Three, summary
After adopting the device bank, device users have got the following benefits:
1. The equipment factory can provide 24-hour remote guidance service: users will never worry about the equipment being too complicated or the loss of skilled workers.
2. The efficiency of production has been qualitatively changed: in the past, it was only known that the equipment utilization rate was not high enough, but why it was low and when it was empty. Now you can see at a glance through the trend chart of the equipment bank, when the equipment is working, When the machine is down and the output is clear, users can use these data to summarize and improve the production process.
3. Electronic billboard: Through the device website of the device bank, the status, output, quality, and operation analysis of the device can be displayed on the mobile phone and computer, so that everyone can better understand the status of the device.
4. Save labor: before one person looked at one device, now one person can look at several devices, and the information of one device can now be viewed by multiple people. For example, if the current batch is almost finished, it needs to be replaced. Molds need to be prepared again. At this time, there is no need for someone to notify the warehouse, because the scheduling can see all the equipment operation status in real time and schedule in time.
The article is original, please indicate the source for reprinting!
Public number: Laogou Technology (LG123321yun)
DMR Digital radios
DMR Digital radios,Motorola Two Way Radios,Motorola Talkabout Radios,Motorola Handheld Radio
Guangzhou Etmy Technology Co., Ltd. , https://www.gzdigitaltalkie.com
