LED bulb test results released: failure rate exceeded 70%

According to foreign media reports, the “Standard Inspection Bureau” and the “Xiejihui” in Taiwan, China randomly selected 21 commercially available LED bulbs and found that 5 pieces of quality were unqualified, 4 of which even had the risk of electric shock, and 10 of them did not meet the requirements. The original technical documents and 8 Chinese marks were in violation. Only 6 of them were qualified, and the unqualified rate exceeded 70%.

According to reports, the "Standard Inspection Bureau" for 21 LED bulbs, "to prevent accidental contact with the protection of the live part", "insulation resistance and withstand voltage", "photobiosafety", "electromagnetic interference", "bulb power (W) "Lighting efficiency (lm/W)" and "color rendering index" and other seven quality items, as well as comparison of important component technical documents, Chinese mark check.

According to the results of the test, there are 5 pieces in the quality project that do not meet the Taiwan standard. Four of them include San Francisco SUN JAKE LED bulb, HTT male light LED bulb, Yingbeier LED ultra-high brightness wide-angle bulb, and HARK tri-color bulb. Lamp, withstand voltage test, insulation breakdown, insufficient insulation and risk of electric shock.

Unqualified products produce electromagnetic wave noise when used, and the interference signal value is greater than the standard limit value, which may affect the normal use of other products in the vicinity; the measured luminous efficiency is lower than 90% of the rated value, and does not meet the energy efficiency reference value. 75 (lm / W); and the higher the color rendering index is closer to the natural color of the sun, affecting the environmental color seen by the human eye.

"Standard Inspection Bureau" said that the "quality project" of 23% of the commercially available LED bulbs does not comply with the regulations, except that the commodity inspection registration is abolished according to the "Commodity Inspection Law", and the operator is notified to rectify and correct within a time limit, and can be placed at NT$100,000 or more. Less than 1 million yuan.

“Coke Foundation” reminds consumers that they should purchase products with “Commodity Inspection Mark”; purchase products with low rated power consumption and high rated luminous flux, which can balance power saving and high brightness; whether the Chinese manual is attached to the inspection. Markings, precautions, etc.; when purchasing, you can use the store or store test equipment to confirm that the bulb is a good product; keep the hand dry when replacing the bulb, first cut off the lamp power and replace it to avoid electric shock or burns.

USB Slip Ring

USB Slip Rings are an increasingly popular way to provide power and data to rotating devices. By using a slip ring, you can avoid having to run cables through a hole in the device's enclosure, which can be difficult and messy. USB slip rings also provide a convenient way to update firmware or change settings on the device without having to open the enclosure. It is commonly used in applications where there is a need to send or receive data or power between a stationary object and a rotating object, such as in an industrial setting where a machine needs to be powered while it is still in use.

Oubaibo's USB Slip Ring, Rotary Swivel Joint manufacturer, chooses the high-quality Senring slip rings, and fiber Rotary Joint products. The company has been in business for many years and is a leading supplier of quality slip ring products. They offer a wide range of products, including high-quality sending slip rings, fiber rotary joints, and more. Their products are affordable and of the highest quality. They are a great supplier for those looking for quality slip ring products.

Usb Slip Ring,Rotary Swivel Joint,Senring Slip Rings,Fiber Rotary Joint

Dongguan Oubaibo Technology Co., Ltd. , https://www.sliproubos.com