Linear Technology Integrated Schottky Diode Dual High Efficiency White LED Driver
The LT3497's 2.3MHz constant switching frequency allows designers to minimize solution footprint and switching noise. Its 2.5V to 10V input voltage range allows the device to be used in handheld applications powered by single or two-cell Li-Ion batteries and applications powered by 5V fixed inputs. High-side current sensing allows each LED string to be driven with a single wire. The LT3497 acts as a constant current source and is responsible for delivering the same current to each white LED, independent of the LED's forward voltage drop fluctuations (which vary with temperature, manufacturing tolerances, and aging). Uniform LED brightness is ensured. Although two independent boost regulators can drive asymmetric LED strings on the same chip, each LED string has independent dimming and shutdown control. Other features include internal soft start/inrush current limit and LED open circuit protection. The LT3497 combines high efficiency, versatility, low noise, and minimal solution footprint, making it ideal for a wide range of backlighting applications that require a lot of white LEDs.
The LT3497 is available from stock in a 3mm x 2mm DFN-10 package. Buy in 1,000-piece quantities starting at $1.70 each.
Performance summary:
• Drive up to 12 white LEDs with 3V power supply (6 LEDs in series for each converter)
Two independent boost converters capable of driving asymmetric LED strings
Independent dimming and shutdown control of two LED strings
High-voltage side detection allows "one-wire current source" for each converter
? Internal Schottky diode
? LED open circuit protection (32V)
? 2.3MHz switching frequency
? ±5% benchmark accuracy
? VIN range: 2.5V to 10V
Both converters have a wide 250:1 True Color PWM dimming range
? Only 1μF output capacitor per converter
? 3mm x 2mm 10-pin DFN package
Medium Voltage Unarmored Cable
Medium voltage unarmored cable is a type of Power Cable used for transmitting electrical energy at voltages ranging from 8.7kV to 15kV. It is designed for use in various applications such as industrial, commercial, and residential buildings, as well as in outdoor environments.
Medium voltage unarmored cable is made up of a copper or aluminum conductor, an insulating layer, and an outer sheath. The conductor is usually stranded to allow for flexibility and to reduce the risk of breakage. The insulating layer is made of a material such as XLPE or EPR which provides excellent electrical insulation and resistance to heat and moisture.
The outer sheath is made of PVC or PE which provides protection against mechanical damage, moisture, and chemicals. Unarmored cables do not have any metallic armor or shielding, which makes them lighter and more flexible than armored cables.
Medium voltage unarmored cables are suitable for a wide range of applications including underground and overhead power transmission, distribution, and substation connections. They are also used in renewable energy systems such as wind and solar power plants.
In summary, medium voltage unarmored cables are a reliable and cost-effective solution for transmitting electrical energy over medium distances. They are designed to meet the highest standards of safety, quality, and performance, and are widely used in various industries and applications.
Unarmoured Medium Voltage Cable,Copper Power Cable,Copper Heat Resistant Flexible Wire,Oxygen-free Copper Cable,Medium Voltage Cables
Ruitian Cable CO.,LTD. , https://www.rtpowercable.com