Notebook teardown dust articles four: Shenzhou K660 I5-D1 disassemble replacement silicone grease, plus upgrade tips
Recently playing Starcraft 2 cooperation tasks, found that playing time for his own notebook occasionally CPU has more than 80 degrees, it is estimated that the last time I disassemble the replacement of the silicone grease is not much to force, the weather is a little hot to withstand, just go to a certain The East sees that there is a silicone cooler known as the thermal conductivity of more than 8 (the original use of the overclocking three seems to be only 1.5) as long as 39.9, a East also gave a free postal volume, so directly start, ready to replace the grease to enhance heat dissipation.
A photo of the Shenzhou notebook was taken first, plus the newly arrived Cool Master Extreme silicone grease and the last disassembled artifact Nanjian 22 which was specially taken from the house to open the unit.
Daily demolition of notebooks, demolition of mobile phones, demolition of small household appliances are sufficient, CRV just tough enough, built-in extension rod to facilitate the disassembly of desktop and other electrical appliances, 69 is more cost-effective.
Then is Cooler Supreme grease, send a scraper and a grease remover (remove the old silicone grease)
Finally, it is necessary to use the tool's portal to disassemble and disassemble the machine. Welcome to appreciate and reward.
Let's talk about the purchase experience of the Shenzhou notebook. I was very reluctant to use the laptop to play games two years ago. I feel that the same configuration is much more expensive than the desktop. The heat dissipation is inferior to that of the desktop. The screen is so much smaller than the desktop, except that it is portable. Basically worthless, two years ago due to job changes, there are often living in the situation of the unit, the unit office is not convenient to put their own desktop computers, there is no table in the bedroom, so that I have no room for desktop lovers, ah, no way Only a laptop office can be purchased for convenience (in case the leader checks), the bedroom can also play in the bed.
For the selection of notebooks, the brand of Shenzhou was selected based on the principle of higher cost-effectiveness (although the water army of black powder on the Internet is a lot, but I believe that a brand can survive for such a long time must have its reason for survival) at the time the K660 The I5, I7 and God of War Z6 hesitated a bit, I7 version hesitant to heat can not hold it down (Buy I7 play games also simply do not feel the difference with the I5), Ares Z6 look good, Is the dual fan's domineering heat really meet my requirements and aesthetic, and then eggs, and finally because of higher prices than qiong qiong chose a cheap version of the K660 I5, then the major online shopping platform to sell 3999, the richest have 3800+, afraid of online shopping encountered various problems, or decided to buy physical stores. Checked for a long time and finally found that Hangzhou only has a Shenzhou-owned high-end store, compared with the Lenovo Dell stores are really low-key ah. Store price 4200, bargaining 4100 to start (opening a shop is not easy, always have to give the store to earn some store rental) So, to start this notebook, in the middle of their own plus a memory replacement SSD, the basic is a Taiwan's perfect game machine (that is, the appearance of ugly, cheaper, do not bike it) gossip finished, the following began to disassemble the replacement of grease:
The final configuration memory 8G, solid state 250G, I54210M, 860 video card
Use yourself, no keyboard membrane, screen film, brush, brush
Dismantle the temperature before the steady state, CPU standby about 50 degrees, graphics card standby 45 degrees
A photo of chrysanthemum
From the rear, the thermal barrier is obviously less, but Shenzhou uses a quick release, which is convenient for disassembling and installing memory to replace the hard disk.
The battery, memory, wireless network card, and hard drive cover can be easily removed with just two latches. It is very easy to replace and clean them.
Unscrew one screw and you can remove the optical drive that has no use (you can install the hard disk with the universal bracket of the optical drive). Usually, you can change the hard disk to the hard disk so that you can solve it. The remaining screws on the D surface are removed and replaced with the C surface.
There is no old model switch panel on the C surface. Use a crowbar to open the keyboard and remove the keyboard cable.
There are only two screws on the C side, which makes it easy to disassemble the old C-plane, which is ten eight screws.
Unscrew the screw to remove the cable (In fact, the cable can not be removed, because at the end did not separate the motherboard more C surface)
Crowbar service
It should be noted here that the wireless network card has a screw and a snap here. It cannot be removed without separating the bottom cover from the C side.
The motherboard is completely exposed. Here are three hard disk interfaces. One is the original sata 3 interface, one is the SATA interface of the optical drive, and the other is the msata interface. Because it is a game console, it is very necessary to replace a solid state drive. , There is no choice to install the solid state msata interface, mainly because of the high price of solid state hard drive msata interface, the heat is relatively large, and then the original 500G hard drive removed to buy a mobile hard disk box into a mobile hard drive, the richest family spent 459 purchased yingchi 240g solid state drive, 20 purchased mobile hard disk box, 168 purchased a 4g memory of Ying Rui Da, 4100+459+20+168=a gaming machine with performance lever + a 500G mobile hard disk, performance and price Basically achieved a balance two years ago (Because it is only a game console, 240G I think is enough, I really feel that it is not enough to insert an SD card to expand capacity, which is cheap and convenient)
A family portrait
Under the main attack cooling module, in order to remove the eight screws, remove the cooling module
Not long after the last application of grease, the grease was thinner and the condition seemed to be OK, but the heat pipe didn't know a little bit of paint, feeling good.
Silicon grease remover is a non-woven fabric with added ethanol, mobile film necessary, removal effect is also good
The fan is also opened for cleaning
Applying silicone grease, here I must be under Tucao, Cooler Master's grease is a bit anti-human, too dry and super hard coated, even my old driver can only be painted so ugly took 15 minutes, not painted Too thin is painted unevenly, dry, describe it is that the general silicone grease is basically the shape between toothpaste and cream, Cooler Supreme silicone grease is between the shape of toothpaste and flour, It's hard to paint, and you can only pressurize the silicone grease when the cooling module is reloaded. (Buying such a large one does not know when it will be used up)
Here again boast about Shenzhou's design, the machine only has three types of screws, one is the fixed wireless network card C panel and the screws below the optical drive, one is a fixed hard drive screws, the rest is a specification, Don't worry about screwing the wrong screw. And the overall screw is relatively small, the buckle is also very strong and not easily broken, really suitable for dismantling and transformation. Disassemble the machine and it's over. Just go back in as it is.
Put it back and reboot:
Camera slag casually look, from the master can clearly see the temperature CPU standby temperature of more than 40 points, graphics card standby 35 degrees
One minute and a half of the operation of the Master Press, CPU temperature 75-78 degrees, graphics card 65 degrees, there is no temperature alarm, the late long-term operation of Starcraft 2 did not exceed 75, the cooling operation basically completed the target.
Finally, talk about the cooling boost tips: First, and the simplest is to put a cooling pad in the bottom of the notebook, because the pads will not be very high, the bottom of the suction is more difficult, the price of thermal pad can significantly increase the amount of air into the bottom Increase heat dissipation. Second, the installation of ventilation type radiator, the same principle, a lot of Taobao, the effect of better than the cooling pad, but ugly plus loud noise. The third is to disassemble the fan and replace the grease. This is basically the root cause. As long as there is no problem with the design of the notebook, the correct replacement of grease can solve the problem of heat dissipation. Finally, there is a dedicated high-end player, the transformation of the cooling module, including the heating tube plus the fan to open the outlet, and so on, non-self and other amateur players can toss the
There are not many pictures in this article, the text is more, a bit trivial, thank you for watching
Industrial Energy Storage System
The main function of the Industrial Energy Storage System is to store energy in the industrial field to meet the energy demand in the industrial production process. It is an energy storage solution for improving energy efficiency and power supply stability in industrial production systems.
Main effect:
Energy peak shaving: Industrial energy storage systems can store energy and release energy at the peak of energy demand to meet the high energy consumption demand in the industrial production process. This helps to achieve a balanced deployment of energy and avoid energy waste or power outages caused by imbalances in energy supply and demand.
Reserve power supply: When the power supply of the power grid is unstable or there is a power outage, the industrial energy storage system can be used as a backup power supply to continue to supply the power required by industrial equipment and ensure the continuous operation of industrial production.
Energy saving and emission reduction: Through rational use of energy storage, industrial energy storage systems can optimize energy consumption and reduce energy waste, thereby achieving the goal of energy saving and emission reduction, and reducing the impact of industrial production on the environment.
Differences from other energy storage systems:
Scale and capacity: Industrial energy storage systems usually have large scale and energy storage capacity to meet the high energy demand in industrial production. Home energy storage systems, on the other hand, are usually smaller and are mainly used in home photovoltaic power generation systems.
Application scenarios: Industrial energy storage systems are mainly used in the industrial field to meet the energy demand in the industrial production process. The Home Energy Storage System is used in the home photovoltaic power generation system to improve the energy self-sufficiency of the home.
Control and management: Due to the large scale of industrial energy storage systems, their control and management require more complex and precise technical means to achieve efficient energy utilization and stable supply. Home energy storage systems are usually relatively simple and easier to automate and manage.
Generally speaking, the main function of industrial energy storage systems is to meet the energy demand in the process of industrial production, realize the balanced deployment of energy, and the stability of the power supply. Compared with home energy storage systems, it is different in terms of scale, capacity, application scenarios, and technical complexity. The application of industrial energy storage systems helps to improve the energy utilization efficiency of industrial production, optimize energy management, and promote sustainable development and green production.
large scale battery energy storage systems, utility scale battery energy storage systems, electrical energy storage systems, commercial and industrial energy storage, energy storage system company
Ningbo Autrends International Trade Co., Ltd. , https://www.aitsolarpanels.com