Optical Fiber Patch Cord FC/Upc-St/Upc-Sm-9/125-Duplex Single Mode Armour
Â
| Cable Structure |
Â
Â
| Technical Parameters |
Features
1.Low insertion loss and hight return loss.
2.Excellent repeatability and changeability
3.Simplex and duplex available.
4.With ceramic fettules.
5.PVC&LSNH cable option.
6.Optical performance 100% factory test.
Specification:Â
| Item | Single Mode | Multi Mode |
| Insertion Loss | <=0.2dB | <=0.3dB |
| Return Loss | PC≥50dB,UPC≥55dB,APC≥60dB | |
| Insert-pull Test | 1000 times | |
| Repeatability | ≤0.1 | |
| Tensile strength | ≥10KG | |
| Operating Temperature | -40ºC~+85ºC | |
| Ceramic Ferrule Specification | 125.5um concentricity deviations:≤1um | 127um concentricity deviation:≤3um |
| Suitable Fiber | 9/125um | 50/125um,62.5/125um |
Performance Index:
| Item | SM(Single Mode) | MM(Multimode) | |||
| Fiber Cable Type | G652/G655/G657 | OM1 | OM2/OM3/OM4 | ||
| Fiber Diameter (um) | 9/125 | 62.5/125 | 50/125 | ||
| Cable OD (mm) | 0.9/1.6/1.8/2.0/2.4/3.0 | ||||
| Endface Type | PC | UPC | APC | UPC | UPC |
| Typical Insertion Loss (dB) | <0.2 | <0.15 | <0.2 | <0.1 | <0.1 |
| Return Loss (dB) | >45 | >50 | >60 | / | |
| Insert-pull Test (dB) | <0.2 | <0.3 | <0.15 | ||
| Interchangeability (dB) | <0.1 | <0.15 | <0.1 | ||
| Anti-tensile Force (N) | >70 | ||||
| Temperature Range (ºC) | -40~+80 | ||||
Applications
1.Local Area Network (LAN)
2.Data communication network
3.Telecommunication optical transmission network
4.Optical access network(OAN)
5.Active device termination
6.Fiber optics data transmission(FODT)
7.Test Equipment
8.CATV
| Related Hot Models |
Â
| Manufacturer Introduction |
Zhuhai Surelink Communication Cable Co.,Ltd is one of the leading manufacturer in the cables
and telecom accessories. Â We have more than 20 years experience in this line.Our factory has overÂ
twenty production lines and 300 employees.
Â
Our productions comply with ISO9001.Professional team,powerful factory and strict quality control giveÂ
best service to our clients and the quality guarantee in every order.
Â
Our products have been widely installed in Telecom companies and many distributors around the world.Â
We export to more than 70 countries and our annual revenue is more than hundreds of million USD.
Â
We have established a close relationship with many companies around the world and we sincerely look
forward to woking with all clients from all over the world.
Â
OEM and ODM order highly welcome !
Â
| Workshop and Company Show |
Â
| Package and Delivery |
Â
Â
| Payment and Shipping |
Payment
We usually use T/T
T/T deposit before production and balance when shipment.
Payment terms: Western Union, Escrow, Paypal, T/T ,L/C
Shipping
If the quantity of the order is not very big, we usually send by express delivery,such as TNT,DHL,UPS,
FEDEX or EMS.
For big order,we will ship the goods by air or by sea.
Â
Â
| Just Talk To Us! |
Â
 OPTICAL FIBER PATCH CORD FC/UPC-ST/UPC-SM-9/125-DUPLEX single mode armour
Â
| Cable Structure |
Â
Â
| Technical Parameters |
Features
1.Low insertion loss and hight return loss.
2.Excellent repeatability and changeability
3.Simplex and duplex available.
4.With ceramic fettules.
5.PVC&LSNH cable option.
6.Optical performance 100% factory test.
Specification:Â
| Item | Single Mode | Multi Mode |
| Insertion Loss | <=0.2dB | <=0.3dB |
| Return Loss | PC≥50dB,UPC≥55dB,APC≥60dB | |
| Insert-pull Test | 1000 times | |
| Repeatability | ≤0.1 | |
| Tensile strength | ≥10KG | |
| Operating Temperature | -40ºC~+85ºC | |
| Ceramic Ferrule Specification | 125.5um concentricity deviations:≤1um | 127um concentricity deviation:≤3um |
| Suitable Fiber | 9/125um | 50/125um,62.5/125um |
Performance Index:
| Item | SM(Single Mode) | MM(Multimode) | |||
| Fiber Cable Type | G652/G655/G657 | OM1 | OM2/OM3/OM4 | ||
| Fiber Diameter (um) | 9/125 | 62.5/125 | 50/125 | ||
| Cable OD (mm) | 0.9/1.6/1.8/2.0/2.4/3.0 | ||||
| Endface Type | PC | UPC | APC | UPC | UPC |
| Typical Insertion Loss (dB) | <0.2 | <0.15 | <0.2 | <0.1 | <0.1 |
| Return Loss (dB) | >45 | >50 | >60 | / | |
| Insert-pull Test (dB) | <0.2 | <0.3 | <0.15 | ||
| Interchangeability (dB) | <0.1 | <0.15 | <0.1 | ||
| Anti-tensile Force (N) | >70 | ||||
| Temperature Range (ºC) | -40~+80 | ||||
Applications
1.Local Area Network (LAN)
2.Data communication network
3.Telecommunication optical transmission network
4.Optical access network(OAN)
5.Active device termination
6.Fiber optics data transmission(FODT)
7.Test Equipment
8.CATV
| Related Hot Models |
Â
| Manufacturer Introduction |
Zhuhai Surelink Communication Cable Co.,Ltd is one of the leading manufacturer in the cables
and telecom accessories. Â We have more than 20 years experience in this line.Our factory has overÂ
twenty production lines and 300 employees.
Â
Our productions comply with ISO9001.Professional team,powerful factory and strict quality control giveÂ
best service to our clients and the quality guarantee in every order.
Â
Our products have been widely installed in Telecom companies and many distributors around the world.Â
We export to more than 70 countries and our annual revenue is more than hundreds of million USD.
Â
We have established a close relationship with many companies around the world and we sincerely look
forward to woking with all clients from all over the world.
Â
OEM and ODM order highly welcome !
Â
| Workshop and Company Show |
Â
| Package and Delivery |
Â
Â
| Payment and Shipping |
Payment
We usually use T/T
T/T deposit before production and balance when shipment.
Payment terms: Western Union, Escrow, Paypal, T/T ,L/C
Shipping
If the quantity of the order is not very big, we usually send by express delivery,such as TNT,DHL,UPS,
FEDEX or EMS.
For big order,we will ship the goods by air or by sea.
Â
Â
| Just Talk To Us! |
Â
Â
Peel Mask PCB
Peel able masks are used in order to protect selected solder holes against plugging during mass soldering or to protect carbon elements and gold plated contacts during mass soldering. Peel able masks are screen printed.
Requirements
• The peelable mask must adhere sufficiently well to the PCB so that it does not peel off when handled correctly.
• It must be able to endure a two to three time soldering process without peeling off, but must remain detachable.
•After soldering of the PCB, the peelable mask must be able to be detached – preferably in one piece. In case of metallized holes, no mask
residue must be left in the drill holes or on the surface of the PCB. In the case of non-metallized drill holes, however a certain amount of residue
can remain.
• The peelable mask must be able to resist conventional solvents such as chlorinated and fluorinated hydrocarbons, isopropanol, conventional
fluxes and similar.
• Particular requirements: The roughness U of the edge of the mask can be 0,5 mm from the tip to the base (left figure
below).
Peel Mask Board,Green Peel Mask Board,Quick Turn Peel Mask Board,Mask Board
Storm Circuit Technology Ltd , http://www.stormpcb.com