Power circuit identification and fault analysis three (rectifier circuit detailed and circuit fault analysis)

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin

Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM

GW MB10F 0.8A 1000V rectifier bridge

SMD aluminum electrolytic capacitor

MOS power IC full range

description:

Detailed explanation of rectifier circuit and circuit fault analysis

The rectifier circuit is an important unit circuit in the power supply circuit. On the one hand, it is a key circuit for converting alternating current into direct current, and on the other hand, its failure rate is relatively high in the power supply circuit.

The key component in the rectifier circuit is the rectifier diode. The rectifier diode is one of the diodes, and the diode strip used in the rectifier circuit is a rectifier tube.

In addition to the use of rectifier diodes, the rectifier circuit also uses a bridge stack and a half bridge stack.

The contents of this document are the basic knowledge of diode, half-wave rectifier circuit, full-wave rectifier circuit, bridge rectifier circuit and voltage doubler rectifier circuit and fault analysis.

Several examples of rectifier circuits are listed in the attachment, see the PDF document for more details!