• Posted on

Use a softener to remove TV dust

The heat vents on the top and sides of the TV are easy to accumulate dust and dust. This not only affects the heat dissipation of the electrical components, but also shortens the service life of the TV and also affects the health of the home. Use a softener to completely remove dust from the TV:

- Add a small amount of softener in water. The ratio of softener to water is about 1:500. Stir well. Put the towel in the diluted softener ** and soak it for about 3 minutes.

- Unplug the TV and wring out the towel (Caution: Towels should not be dripping with water, so as not to fall into the TV and corrode electronic components). All the heat vents on the TV should be covered with a towel.

- Set off a corner of the towel, use a hair dryer to blow the air inside the TV through the cooling holes, and after the dust is blown up, blow it in the other direction. There are cations in the softener, which have a positive charge. The dust has an anion and is negatively charged. After the dust in the television is blown up, it will be absorbed on the wet towel resting on the heat sink.

In this way, you can also thoroughly clean the computer hosts and speakers that have more dust.

Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.

Custom Cable Assembly

We provide wire harness manufacturing services for cable harnesses and built-to-print cables used in many industries, such as computer, game machine, POS machine, ATM , audio/video, electro-mechanical, data communications, telecommunications, medical, etc.

Related Products:speaker cable,customized cable assemblies,electrical cable assemblies.

We have developed a tradition of high-tech engineering, prototyping, and quality custom cable manufacturing at very competitive pricing. Also with professional flow chart (wire cutting-stripping-copper twisting-crimping-crimping 100% inspection-soldering-molding-asssembling-testing-FQC100% -OQC1-OQC2) , which can help us support customers with stable quality.


Custom Wire Harness Assembly

  • Electrified dimensional build boards with 100% continuity test
  • Capabilities to test for fuse,diode,resistor, and relay presence
  • Mating test fixtures for lower production wire harnesses
  • Ability to free hand build harnesses for prototypes and design validation
  • Separate layout boards for addition of fir tree clips, rosebuds, clamps,and labels after coverings added
  • Capabilities to add board interlocks and test markings to harness as needed

Speaker Cable,Straight Bnc Cable Assembly,Idc Red Custom Cable Assembly,Customized Cable Assemblies,EV Cable Assemblies,Cable Assembly,Custom Cable,Customized Cable Assemblies

ETOP WIREHARNESS LIMITED , https://www.wireharness-assembling.com