36 years of experience in the old flying hands Lu Changyin: What are the main points of the farmer’s aerial photography?

Lu Changyin, a native of Nanjing, Zhejiang Province, has been changing from 1981 to photography. The photographic equipment in his hands is constantly changing. From traditional film cameras to aerial photography of drones , the only constant is the love of farming photography.

Lu Changyin is shooting

In 1986, Lu Changyin photographed the farm through the Yunwu plane. In 1990, Lu Changyin took the helicopter shooting farm of the Nanjing Military Region. Afterwards, the shooting method was constantly changing. The camera was lifted up to the sky with a balloon, and the aerial helicopter was used for aerial photography. Later, it was used for large-scale aerial photography. Xinjiang S1000, Wu Er, and Lu Changyin’s aerial photography always seem to be combined with the farmer’s.

Lu Changyin’s farm photography

Shooting reason

 

Asked about the reasons, Lu Changyin proudly said: do not forget the initial heart, remember the mission. Lu Changyin can be said to be a sentiment to the photography of the farmer. At the age of 20, he became the first correspondent of CCTV's national farms. At the age of 23, he became the top ten farmer's photography in the country. The farmer's life in the past 20 years has allowed him to grow. The farm shoots him. It has become a responsibility.

Lu Changyin’s farm photography

Shooting time and location

 

The filming of the farmer's house was a big project. The official start of the farmer's aerial photography was in the summer of 2009, and this year is the eighth year. The shooting locations are in the hometown of Lu Changyin, Su Shi. Su Shi has 18 farms, and Lu Changyin will choose to create according to the changes in the spring, summer, autumn and winter seasons.

Lu Changyin’s farm photography

This summer's filming of the farmer made Lu Changyin particularly impressed. In August, Lu Changyin planned to shoot the summer farmland, which was also commissioned by a winery in Australia during the filming. Lu Changyin had just returned from Australia. He shot 18 farms without a break.

 

The 18 farms were about 3,000 kilometers in a circle, and Lu Changyin shot the 18 farms in 9 days. I was on the road at night, shooting during the day, and I was really relieved after I finished shooting.

Lu Changyin is shooting at the farm

Shooting equipment selection

 

For the farming equipment, Lu Changyin always chooses the most advanced equipment for shooting. In 2009, Lu Changyin used the helium balloon to shoot the farmland; in 2011, he began to use the model helicopter to shoot the farmland; in 2014, the eight-axis Dajiang drone s1000 became the aerial weapon of the farmer.

Lu Changyin’s farm photography

This year's farmer's filming, Lu Changyin used the Xinjiang 2, equipped with five shots. The shots are Old Frog 7.5, Olympus 12, 25 and 45, and Dajiang 15.

 

Lu Changyin told reporters that the choice of the lens is the most critical, what kind of lens to choose what kind of theme. The Olympus 45 lens will compress the space, making the objects appear compact, so xx will choose this lens when shooting the town; the old frog 7.5 is suitable for shooting the foreground and impact, when shooting the fish pond Will choose it; 12 is suitable for shooting some fields; 25 is suitable for normal vision.

Lu Changyin’s farm photography

Shooting experience

 

Lu Changyin graduated from Nanjing Normal University with a major in photography, so he is particularly particular about light and composition. In his view, the focus of the aerial photography should be placed on the "shoot", the air is a fulcrum in the air, and the main thing is to see your photography is not at home.

 

It is necessary to shoot for the sunrise and sunset of each farmland site, and to capture as many photographs as possible during the golden hours of sunrise and sunset.

 

When shooting, the sunrise and sunset should try to choose the fish pond as the foreground. Such a reflection of the sun will be very charming, and the order of shooting is best to take the water surface of the fish pond first, and then take the fields and towns.

Lu Changyin’s farm photography

Don't be lazy when you see the weather, take action immediately. For example, the typhoon has just passed, and the weather is transparent at that time, which is also an excellent moment for aerial photography.

 

When the weather is bad, you need to survey, plan and actual situation. Before shooting, you can look at the field on the mobile map to see if the field is suitable and whether the farm's fields are planned. At the scene, you need to continue the survey and choose to shoot according to the light.

 

If you see a good angle during shooting, don't worry, remember the general position, and then shoot according to the light, plan ahead, shoot behind.

Lu Changyin’s farm photography

Precautions

 

Lu Changyin told reporters that safety should be placed in the first place whenever it is safe. From the beginning of shooting to the present, the S1000 of Dajiang has already exploded 2 sets, and the Elf 3 has also exploded at least 4 units, and 90% of the reasons for the bombing machine are caused by humans.

Lu Changyin’s farm photography

First, we must do a good job of preparation, including the planning of the route and the understanding of the surrounding environment;

 

Secondly, the inspection of equipment and the replacement of fragile accessories are the most important for battery and motor maintenance;

 

Hover for 1 minute before flying to see if the aircraft is in good condition;

 

Keep away from the crowd when flying, believe in intuition, and doubtful places can not fly;

 

When flying, you should not be greedy for the beautiful scenery. You should have a stable heart and fly according to your planned schedule.

 

Staffing

Lu Changyin shooting team

It is difficult for a farmer to shoot by one person alone, and usually chooses a team to shoot. Lu Changyin usually needs four people to perform a shooting task, director, flying hand, head, and driver. The work of the director and Yuntai is carried out by Lu Changyin, and the other positions are in their respective roles and cooperation.

 

Lu Changyin finally told reporters that the farmer wants to shoot the characteristics, must shoot in multiple seasons, the flight height is well grasped, according to the content to choose the appropriate lens, grasp the composition, in order to create a beautiful picture. He intends to continue shooting the farms and strive to achieve the ultimate in farming.

1.0mm Female Pin Header

1.0mm (.039") Female Headers

Overview

Whenever there is a need for fitting small-sized connectors in compact devices, the 1.0mm pitch female header, or sometimes referred to as header connector, is ideally suited for this application. Not only does this female header space-savvy, but it is also designed for vacuum pick and place that makes it suitable for high volume automated manufacturing.
Antenk offers these low profile, easy-install, SMT or THM miniature female connector plugs at high quality and affordable China-quoted price, for board-to-board connection, snuggly fitting the pins of a male header and acting as a receptacle.
Assembly and service is simple with either vertical (straight), elevated or at a right angle configuration/orientation, which can dissipate current of about 1.0 A or less in a tape and reel packaging. The filleted corners can also remove shadowing allowing optimization of LED output.
Also, the 1.0mm pitch female headers are made to work in Arduino boards, Arduino Pro and Arduino Mega with either single or double-row female headers, facilitating connections for programming and incorporation into other circuits. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Female header always called as [Header connector", Antenk provide widely range of header connector, from 2.54mm (.100″ inch) pitch to 1.0mm (.039″ inch) pitch. The number of pins (contacts) is from 2 to 40 pins per orw. There are three type: Straight (Dip Vertical), Right angle, SMT (surface mount).
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.

Applications of 1.0mm Pitch Female Headers
Its small size is most suitable for PCB connections of small equipment and devices such as:
Arduino Boards
Architectural and sign lighting
Retail and display lighting
Fluorescent LED retrofit lighting
Cabinet or furniture lighting
Commercial / residential cove lighting
WiFi equipment
Gaming consoles,
Measurement instruments
Medical Diagnostic and Monitoring equipment
Communications: Telecoms and Datacoms
Industrial and Automotive Control and Test

Mount Type: Through-hole vs Surface Mount

At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).

Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
1.0mm vertical single row female header, 1.0mm vertical dual row female header, 1.0mm Elevated single row female header, 1.0mm Elevated dual row female Header, 1.0mm right-angle single row female header and 1.0mm right-angle dual row female header are some examples of Antenk products with through-hole mount type.

Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
1.0mm Right-angle Dual Row female header, 1.0mm SMT Single row female header, 1.0mm SMT Dual row female header and 1.0mm Elevated Dual Row female Header are Antenk`s SMT female headers.

Soldering Temperature for 1.0mm Pitch Female Headers

Soldering SMT female connectors can be done at a maximum peak temperature of 260°C for maximum 60 seconds.

Orientation/Pin-Type: Vertical (Straight) and Right-Angle
1.0mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle female header.

Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.

Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.


PCB Connector Stacking
Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.

Elevated Sockets/Female Headers
Elevated Sockets aka Stacked sockets/receptacles or Mezzanine are simply stacked female headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.

Choosing this type of stacking configuration promotes the following benefits:
Connector Isolation - the contacts are shrouded preventing cable connection mishaps and good guidance for the mating header connectors.
For off-the-shelf wireless PCB module, stacking height is optimized with elevated sockets.
Offers superior strength and rigidity.
Polarisation prevents users from inverted insertion.

Single, Dual or Multiple Number of Rows
For a 1.0mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3 ,4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.

Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.

Custom 1.0mm Pitch Female Headers
Customizable 1.0 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.

Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.

Pcb Header,1.0Mm Female Pin Header,1.0Mm Female Header Connector,1.0Mm Pcb Header,0.039" Female Headers,0.039" Pin Header, 1.0mm Female Pin Header SMT, 1.0mm Female Pin Header THT

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com