Purified water equipment - special characteristics and standards for pharmaceutical preparations

( 1), purified water equipment - special features of pharmaceutical preparations

(1) Automatic control, easy to operate.

(2) The whole set of equipment is made of stainless steel, and the water tank is made of stainless steel medicine special water tank.

(3) Equipped with water softener to ensure stable operation of RO system and EDI system due to the influence of hardness.

(4) The imported Hyde energy ultra-low pressure reverse osmosis has high desalination rate, long service life, stable operation and low energy consumption by 20% .

(5) the reverse osmosis system using automatic control mode, the main components imported components, high stability, simple convenient.

(6) The EDI system uses a constant pressure regulation system to ensure stable water quality.

(7) The original imported membrane stack is used, the performance is stable, the service life is long, and the professional technology ensures the water quality of the EDI system to be stable during short-term shutdown or long-term shutdown.

(8) EDI flowmeter adopts imported flowmeter to prevent damage to the membrane pile caused by no concentrated water production caused by blockage of concentrated water passage or other equipment failure.

(9) The EDI system is equipped with UV sterilization and membrane filters to ensure stable water quality of EDI .

(10) It has various device safety functions such as waterless protection and high and low pressure protection.

(11) All water tanks are made of purified water and special water tanks, equipped with a pressure level gauge, rotary spray cleaning and air breathing apparatus.

(12) Equipped with ozone sterilization quality and quantity, and designed according to the best configuration.

( 2 ) , purified water equipment - water quality standards for pharmaceutical preparations

Chemical index: in line with the water quality requirements of the 2010 edition of the Pharmacopoeia

1. Hygiene examination: microbe 100CFU/ml

2 , endotoxin: 0.25EU/ml

3 , resistivity: ≥ 0.5M Ω .CM

4 , conductivity: ≤ 2 μ s / cm

5 , ammonia: ≤ 0.3 μ g / ml

6 , nitrate: ≤ 0.06 μ g / ml

7 , heavy metal: ≤ 0.5 μ g / ml

( 3 ) , purified water equipment - special process for pharmaceutical preparations

Raw water - raw water pressure pump - multi-media filter - activated carbon filter - water softener ( or scale inhibitor dosing device ) - precision filter - first stage reverse osmosis - PH adjustment - intermediate tank ( optional ) - second level Reverse osmosis ( reverse osmosis membrane surface with positive charge ) - purification tank - pure water pump - UV sterilizer - microporous filter - water point

Solder Cup D-Sub Connectors

Antenk D-Sub,D-Shaped Connectors Solutions offer a broad range of higher reliability D-Sub connectors.

Antenk's D-Sub product line is designed for applications that require a rugged, robust I/O connector system with various styles and mounting options. All are used in a variety of industries including computer, industrial, medical, and military markets.

Antenk High-Density D-Sub Connectors
Available in cable mount options including crimp & solder cup and the board mount options including Dip Solder, Wire Wrap, High Profile, Right Angle, & Surface Mount (SMT). This comprehensive Antenk High-Density Density D-Sub product offering is available in both stamped & formed and machined contact options.
High density D-Sub connectors, for applications where the best possible contact density is required. Due to the [high" density of the 15, 26, 44, 62 and 78 contacts, this series is ideal for the most modern applications. The insulating body, a monoblock, complies with the UL94 V-0 standard. The contacts are machined and available in several quality classes.

Antenk Solder Type D-Sub Connector

Available in standard and high density versions

Supplied with stamped & formed or screw machine contacts.

Standard contact terminations accomodate up to 20 AWG standard wire

Available with white (nylon) or black (PBT) insulators. Standard shell plating is tin

Antenk D-Sub connectors solder cup machined contacts are manufactured according to the standards MIL-C-24308 and DIN 41652. The standard connectors from Antenk are available in all known versions and sizes. They are available in various version with numerous assemblies. The insulating body, a monoblock, complies with the UL94 V-0 standard. The contacts are machined and available in several quality classes.

Features of Antenk's Solder Cup Standard D-Sub Connector Machined contacts

Materials of Antenk Solder Cup Standard D-Sub Connector Machined contacts

Materials of Solder Cup High Density D-Sub Machined Contacts

9 pin, 15 pin, 25 pin, 37 pin, 50 pin Male Solder Cup Standard D-Sub Connectors Machined Contacts, Solder Cup High Density D-Sub Machined Contacts,Female Solder Cup Standard D-Sub Connectors Machined Contacts

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com