• Posted on

Split Core CT 0.333V Current Transformer China Manufacturer

Model NO.: XH=SCT-0750
Insulating Medium: Epoxy Resin
Installation: Active Type
Magnetic Circuit Structure: Combined Type
Voltage Transformation Principle: Capacitive Type
Model: Split Core Current Transformer
Output: 0.33V or Ma
Certificates: UL,ETL,CE,RoHS
Trademark: Jiangyin spark
Specification: UL, ROHS, ISO9001: 2008
Origin: China(Mainland)
HS Code: 8504

Split Core Current Transformer SCT 333mV Secondary Output

The JIANGYIN SPARK series of split core current transformer are designed for fast and easy installation.The split core design permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken offline and disconnected for CT installation.This method permits a safer,easy and portable current measurement. An internal precision burden resistor across the secondary winding of the CT provides a safe low voltage output and permits safe opening of the secondary

Features

Low cost.
Split core design;safer,easier installation,portable.

Specifications

Rated Current 5A to 3000A loads.
Rated output: 0.333Vac
Accuracy:±1% from 5% to 120% of rated current
Phase Angle: less than 2 degrees at 50% of rated current
Insulation Voltage:600Vac
Maximum Primary Voltage:5000Vac(Insulated Conductor)
Operating Temperature:-15ºCto 60ºC.
Frequency Range:50-400Hz
Leads:4Foot(105cm),UL 1015,Twisted Pair,0.34 mm2(22AWG)
UL&CE recognized. RoHS Compliant
Output and leads can be customized

Application

Measures AC current flow to electric motors, lighting, air conditioning equipment, etc.Compatible with HVAC temperature control, power management,building automation systems.

Model I. D. Rated Amps Output Accuracy SIZE( mm )
A B C D E
XH-SCT-0750 0.75"
(19.1mm)		 5, 15, 30, 50, 70, 100, 150, 200 0.333V 1.0 51.6 54.1 16.6 19.1 18
XH-SCT-1250 1.25"
(31.8mm)		 70, 100, 150, 200, 250, 300, 400, 600 1.0 82.3 85.3 26.4 32 32.3
XH-SCT-2000 2.00"
(50.8mm)		 400, 600, 800, 1000, 1200 1.0 120 125 29.6 52.5 52
XH-SCT-3000 3.00" x 5.00"
(76.2mm x127mm)		 1000, 1200, 1500, 2000.3000 1.0 145 199 30.5 76 130
Split Core CT 0.333V Current Transformer China Manufacturer
Split Core CT 0.333V Current Transformer China Manufacturer
Split Core CT 0.333V Current Transformer China Manufacturer

Molded Waterproofing Cable Assemblies

We specialize in waterproofing products overmolding. We can custom build, custom mold, and over-mold your cable designs. We specialize in molded cable manufacturing for the widest diversity of cable and connector types, across the whole spectrum of industries. Rich expeirence in developing and proposing solution Special for IP67, IP68 waterproofing products.

Molded waterproofing cable assemblies, waterproof wire harness, waterproofing cables overmolding

ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com