Using the chip to remotely control the mouse, condemned
Recently, the use of electronic chips to control the movement of mice has caused a lot of media attention. This technology may greatly help the patients to regain their walking ability.
In the middle of the test, the spinal cord in the back of the mouse has been cut off, and the brain signal does not reach the lower spinal cord, but it can transmit current to the spinal nerve through the neurosurgical implant, enabling them to walk on the treadmill. Scientists can control the movement of mice by changing electrical signals. In the experiment, the mouse successfully took a thousand steps and challenged the stairs of various heights and lengths.
Professor Gregoire CourTIne of the Federal Institute of Technology in Lausanne, Switzerland, is the lead researcher of the study. He said: "We have completely controlled the hind legs of the mice. It has no control over its limbs, but we can reactivate the severed spinal cord. And stimulate to let the mouse walk naturally. We can control the way the mouse walks forward and the height of the leg."
The study is part of the European “neurological walking†project, which is scheduled to be tested on human patients as early as next summer. Scientists have designed a humanized device for clinical trials. Dr. Silvestro Micera, also from the Federal Institute of Technology in Lausanne, Switzerland, said, “We can use these simple neurological findings to develop more effective neuroprosthetic techniques. We believe that this technology will greatly improve those encountering neurological disorders sooner or later. The quality of life of the group."
Dr. Jarrod Bailey, from the UK's “Abolition of Living Anatomy†organization, condemned the study. He pointed out: “The mice in the experiment will suffer unimaginable pain, the public will not support this research, and the animal spine will be cut off. Animal mites simply cannot mimic the long-term effects of spinal cord injury on humans."
The utility model provides a novel shock-resistant and extrusion-resistant marine pressure gauge. The novel seismic-resistant and extrusion-resistant marine pressure gauge comprises a pressure gauge body and a protective cover, and both sides of the bottom of the pressure gauge body are fixedly connected with installation One side of the mounting plate is provided with a mounting slot, the bottom of the mounting plate is fixedly connected with a box body, one side of the inside of the box body is provided with a drive motor, and one end of the output shaft of the drive motor is fixedly connected with a A turntable, one side of the turntable is fixedly connected with a sliding member, a sliding plate is slidably connected between two sides inside the box body, and a sliding groove is formed on the sliding plate. The novel shock-resistant and extrusion-resistant provided by the utility model This type of marine pressure gauge protects the pressure gauge by setting a protective cover on the pressure gauge to avoid being squeezed or impacted by the outside world during use, causing damage to the pressure gauge, thereby improving the anti-seismic and extrusion resistance of the pressure gauge. Ability.
Pressure Gauge,Water Pressure Gauge,Digital Air Pressure Gauge,Hydraulic Pressure Gauge
Taizhou Jiabo Instrument Technology Co., Ltd. , https://www.jbcbyq.com