Application of MTS sensor in single cylinder hydraulic cone crusher
The hydraulic cone crusher is divided into a single-cylinder hydraulic cone crusher and a multi-cylinder hydraulic cone crusher. The MTS sensor is mainly used in the single-cylinder cone crusher. The main mechanical structure of the single-cylinder cone crusher is as follows:
The working principle is as follows: the motor drives the eccentric sleeve assembly and the spindle assembly centered on the theoretical vertical line, and revolves in the copper bushing. The spindle assembly can be rotated in the eccentric copper sleeve with the center line of the main shaft. When the material is added to the crushing chamber, the spindle assembly (spindle, inner cone) slowly rotates within the eccentric copper sleeve under the resistance of the material. The running trajectory of the inner cone appears to oscillate back and forth within the crushing chamber while rotating slowly. The material is crushed by the inner cone of the swing.
The MTS sensor is mainly installed in the hydraulic cylinder in the structural drawing. Its main function is two points:
1. Adjustment of the size of the discharge port: The function of the bottom hydraulic cylinder is to adjust the upper and lower positions of the main shaft to adjust the spacing between the moving cone and the outer cone lining to adjust the size of the discharge granularity of the crusher.
2. Visually display the change of the size of the crushing port, and at the same time, it is convenient to adjust the overload protection and repeatedly take off and remove the mine.
Application picture of MTS sensor:
Recommended sensor:
â—Anti-shock or vibration, the highest seismic resistance 30g/100-2000HZ/IEC standard 68-2-6
â—Standard outer tube can withstand pressure of 350bar, up to 700bar, and can be customized for continuous pressure of 800bar, up to 1200bar
â— Double shielding, high anti-interference ability
â—High degree of protection, IP67 or IP68 (straight out cable)
â—Easy to replace electronic components and waveguides without removing pressure
GBS compact sensor
â—Adapt to a small installation space, the thickness of the electronic head is only 34mm, and the side is out
â—High degree of protection, IP67 or IP68 (straight out cable)
◠Repeatability can reach 0.005% of full scale (minimum 20μ)
Voom Pod 1500 Vape is so convenient, portable, and small volume, you just need to take them
out of your pocket and take a puff, feel the cloud of smoke, and the fragrance of fruit surrounding you. It's so great.
We are the distributor of the Vapesoul & Voom vape brand, we sell vapesoul disposable vape,vapesoul vape bar, voom vape disposable, and so on.
We are also China's leading manufacturer and supplier of Disposable Vapes puff bars, disposable vape kit, e-cigarette
vape pens, and e-cigarette kit, and we specialize in disposable vapes, e-cigarette vape pens, e-cigarette kits, etc.
voom pod 1500 vape device,voom pod 1500 vape pen,voom pod 1500 vape disposable,voom pod 1500 vape system,voom pod 1500 vape starter kit
Ningbo Autrends International Trade Co.,Ltd. , https://www.mosvapor.com