FCC PART68 telephone interface circuit diagram and related introduction

The user must use the PCC when connecting any circuit to the telephone line (Federal Communications Commission, established by COMMUNICATIONACT in 1934, is an independent agency of the US government and is directly responsible to the Congress. The FCC controls the radio broadcast , television, telecommunications, satellite and cable to coordinate domestic and international communications) Part68 interface. FCC PART68 telephone interface circuit diagram

6.7MM Wire To Board Connectors

6.7MM Wire To Board Connectors.6700series.

What are the main types of wire to wire connectors? In the connector industry, there is also a kind of product called connecting wire, which is often said to be terminal wire. Some terminals have terminals at one end, the other end is welded on the circuit board, and some have terminals at both ends. When these terminals form a male and a female, when the wire rod and wire rod form a mutual connection, the terminal can be regarded as A wire to wire connector, that is to say, most terminal blocks are a wire to wire connector product.

Line to board connector, connector product connecting wire or cable to circuit board. The main embodiment of the line to board connector is that the I / O terminal wire is formed by adding a connector, and the other end of the terminal line is welded on the circuit board, and the connection relationship is formed by the male and female docking of the connector, forming a complete connection scheme. Relatively speaking, many connectors can form a line-to-line relationship, and can also form a line-to-board relationship. One of the more easily distinguished cases is that one section of the connector is welded to the circuit board, and not all connectors are installed on the circuit board in the common welding way.

6.7MM Wire To Board Connectors

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com