Just for a Honda Civic, go to the queue one week in advance, what magic is this car?
For many sneakerheads, when the limited-edition shoes are in the market, they will always go to the queue to pick up the purchase price. Well, I have done this kind of thing, but I didn’t get the purchase qualification at the end.
Stevie Phamo from Houston is a Honda powder, and he owns it shortly after the Civic was launched. If the car is released like a limited-edition shoe, Stevie will definitely line up one week ahead of others. Yes, he only qualified for one purchase.
Of course, we are still coming back to talk about this car. The biggest charm of this car is that it has many suitable modified parts, which are plug and play and very convenient. Of course, Stevie also modified the car according to his own taste.
Currently, it uses a set of Tein Mono Flex's twisted suspension and custom springs to lower the body. Progress's rear anti-roll bar tightens the rear of the car. Skunk 2's tilt kit and SPC's angle screws are used to assist Set the suspension geometry...
What you see now is the Cosmis Racing wheel, and changing the wheel is like changing shoes, so it's not hard to guess - Stevie has more than just this set of wheels, he also collects nearly 8 different wheels. Among them are BBS, Works, Desmonds, Panasports and other big names!
In terms of appearance, on the basis of the original, it adds Mugen's infinite front lip, side skirt and carbon fiber hood. PIAA's yellow fog lights are mounted on the head of the JDM, and the tail is the S2000 diffuser and the tail of the Big Country Labs.
As can be seen from all the details, Stevie not only spent a lot of time on this car, but also spent a lot of time and money.
Some people will save money to change the car, after all, the conversion is very burning, but everything must be considered. Stevie has clearly grasped the balance between this, after all, he not only likes to change the car, but also likes to travel.
Digital Resistive Touch Membrane Switch
Digital Resistive (Transparent Membrane Switch) digital switch
This touch switch is sometimes referred to as the X-Y matrix touch switch. Digital resistive touch switch are as easy to interface with a controller as a conventional matrix keyboard and popular when finger-sized touch zones are required.
To produce digital resistive touch switch, the ITO coating is etched away (or selectively applied) to form rows on one layer and columns on the opposite layer (Figure 1). When assembled, the rows and columns form a matrix of switches. The location of each switch is permanent, and the size cannot change. The resolution of the touch switch depends solely on the number of rows and columns.
Digital Resistive Touch Membrane Switch,Oval Type Membrane Switch,Two Circuit Layer Membrane Switch,Blue Background Membrane Switch
Dongguan Nanhuang Industry Co., Ltd , https://www.soushine-nanhuang.com