Multi-function panel features and functions

Multi-functional panel features

The multifunctional touch panel is shipped without a driver module. In actual use, a centralized driver is used to achieve complete separation of the panel operation and high voltage drive; in addition, the use of a centralized driver can standardize the cabling, and also facilitate the future Maintenance.

Of course, the multi-function panel itself can also be driven by matching a single/dual/quad high-voltage driver module (hint: the high-voltage driver module is plugged into the back of the multi-function touch panel, the two are combined into one) - 4 lights or 1-2 electric curtains.

Multifunctional panel features

(1) Single-channel high-voltage driver module: CRM-1L/1 ​​(adjustable), driving one incandescent lamp, dimmable; CRM-1L/J (non-adjustable), driving all lights.

(2) Dual high-voltage drive module: CRM-2 L/K 10 J (the first channel is adjustable, the second channel is not adjustable), driving two lights; CRM-2 L/J 10 J (both channels are not adjustable ), drive two lights, or drive all the way to electric curtains.

(3) Three-way high-voltage drive module: drive three-way light, not adjustable; or drive one-way electric curtain and one-way light.

(4) Four-way high-voltage drive module: drive four lights, not adjustable; or drive two-way (double-layer) electric curtains.

Multi-functional panel technical parameters:

(1) Model: CRM-DGN, CRM-DGN/S (with sensor interface, can receive two dry contact signals).

(2) Panel specifications: 86mm 㐅 90mm, mounting hole pitch of 60. 3mm, depth of 25mm.

(3) Load rated power with single or dual high-voltage drive modules: when the high-voltage drive module is driven by a thyristor (adjustable module), the rated power of the load is 220W; when the high-voltage drive module is driven by a relay (non-adjustable module), The rated power of the load is 1000w.

(4) Load rated power with three-way/four-way high-voltage drive modules: Each road is a relay drive, and the rated power of each load is 500W.

(5) Load power: AC220V/50Hz.

(6) Operating current: 40 to 135 mA (Depending on whether the energy saving mode is enabled, the brightness of the display, the drive module, the model of the drive module, or the on/off state of the driven load, etc.).