SAMA Marathon Gaming Gaming RGB Chassis Unpacking
um, yes.
When the computer hardware is about to hang off, when the e-sports are banned by the mother. President Huang made a debut, led the e-sports, but also smoothly saved the DIY, can be described as a double-edged sword, the fact proved that the tiger father no dog. Smart manufacturers cling to the headmaster's hurricane all the way, giving birth to today's dazzling DIY products.
Last time I made an unacceptable box. I was a bit unwilling to leave the warehouse. After a few days, re-engage a more popular chassis to unpack.
Speaking of the tiger's father and dog, it's a bit of a relationship with me. As long as it is a hardware material, what brand of chassis is the same for me, and the post is purely a brush presence (loading force), compared to those local billionaires who are able to save the world by millions, are no longer prodigal.
(First horse ARK Ark gaming chassis)
The Xianma brand is particularly familiar to people in mainland China. He always walks in the entry-level segment, and the cost-effectiveness of the harmony has been adopted by many enthusiasts. There are even a number of tyrants who have become his users out of curiosity.
However, this flagship new product has a qualitative change compared to previous years. Not only did the design have a leap forward, but the price also deviated from the gold mark of the price/performance ratio.
Since it is the main e-sports style, it is also reasonable to enhance the importance of forcing. Diversified pre-I/O, fully translucent sideboard, RGB LED system, original accessories, and new architecture are all comparable to previous chassis.
The use of a buckle to pop out the filter is a little bit of meaning, that is, the method of dismantling it with a click down. The pre-filter is also designed the same, and is the same, can be used interchangeably. However, the front filter is fixed on one foot, making it easier to align the socket during installation.
Although unlike the Faraday car door, it was very easy to disassemble. The figure is merely illustrative and only means that it can be disassembled here.
The shape of the fan bracket was good, and I thought that I could hang a 240 cold row upside down. After the result was installed, the filter would not fit in. Can only be installed normally inside.
One thing I don't understand is that in order to achieve RGB control, the 5 fans that come with the chassis are all special interfaces. Fortunately, the quality of these fans is not bad.
Jump a picture of a fan RGB control board. There are several spare interfaces on the PCB board, which obviously can further increase the number of fans. It's just that this interface probably won't be available.
Could it be that the First Horse will sell such fans alone? ? ? That can only find your home to buy the boss, can you come to a full-court-like laughter.
The front and the top are the same. In fact, the position of the optical drive is gone. It would be better to replace it with three fans.
Due to the fan interface, I did not remove it. Also, be careful when replacing other fans.
Xianma's ATX III architecture.
This structure is plainly to hide the HDD's location, and the rest of the space is used to demonstrate the horizontal SSD. Maybe it is thought that HDD is not as high as SSD. The only thing that feels scientific is that the distance between the hard disk, the motherboard, and the power supply has been shortened a lot. If there is a custom cable, the length of the cable can be made short and short.
The number of PCI reaches 8, which is one more than the average motherboard. Please allow me to think about how to use it. . .
Can't think of it, add a PCI fan to the graphics card? ? ?
Three SSD cages, this position and the back hole are just fine.
Used many chassis, SSD is basically close to the backplane. The hard disk is put in, there is no room for you to insert the wire at all. And now many power supply SATA power supply interfaces are 90 degree vertical elbows. Do not name, and you can easily find more than a dozen interested.
The first chassis of this horse finally has a hand-drawn filter. However, the buckle is a bit like a door lock. When you pull it out, you need to press down a little. Many foreign chassis use semicircular ball shape here, and it is not hard to push forward.
This position is a bit square. Although there is no impact here, it looks a bit small. Whether it is pad or hollow area.
The ark is very rare to use the only configuration with two-sided full penetration. If you are 200% handicapped and want to hide the messy backline, you may not find opaque side panels, but you can buy cans and paint the back.
This is a place where you can test your skills. The line has been sorted out at the factory, as a reference for the user. However, experienced players all know that after the line is completed, it is basically impossible to restore it to the present.
The location where the SSD had been placed before has now been returned to the control board. If you can, it will be more comfortable to cover a lid.
By the way, this all-side board screw. Each side plate has 6 screws to fix it. It does not need to be too tight when it is installed. Otherwise, the rubber will burst out. This is normal.
RGB LED effect On some LED effects, I feel very good.
Incidentally treat a cervical spine.
The Ark has obviously progressed a lot in terms of details, but the details have actually improved, but it is not a luxury. I feel that many parts of the price are given to the RGB LED. This should be seen by many people.
In fact, I don't understand why the ark has to be double sided and the picture after wiring is so beautiful that she almost cries. Toss for a long time, summed up the experience is; first all the lines are dismantled, and then give priority to the power cord finishing, and finally connect the chassis line and fan line. This will be less intertwined with the line, it will not take a long time to organize. Of course, it is best not to have OCD.
The good news is that the chassis is relatively heavy. The parameter says that the gross weight is 8.9KG. This weight is more or less worthy of his worth.
In the end, there is a little bit of hope. Diversified chassis are now emerging, and RGB fans have also been added to the main components of the chassis. However, the warranty for the chassis remains in the column of metal products. Whether it should also be with the time, like a Video card to do a warranty for the fan. . .
micro usb b cable,micro usb b to usb c,usb micro b extension cable,usb micro b 3.0
Dongguan Bofan technology Co., LTD , https://www.pengliandz.com